VERLIJMINGSKIT WIT 290ML FIX ALL HIGH TACK SOUD

Product description:

• Fix All High Tack is a high quality, single component joint sealant with high adhesive strength. It is based on SMX Hybrid Polymer technology.

Characteristics:

• High performance mechanical properties
• Combines high stiffness with very high bond strength
• High green strength, quick build-up of end strength, high sheer strength after full cure
• Does not contain isocyanates, silicone, solvent
• Flexible elastic rubber - movement accommodation up to 20%
• No bubble formation within sealant (in high temperature and humidity applications)
• Very easy to tool and finish
• Good colour stability and UV resistance

Applications:

• Sealing and bonding in the building and construction industry.
• Structural bonding in vibrating constructions.

Directions for use:

• Joint dimensions:
• Minimal width: 2mm (bonding) 5mm (joints)
• Maximal width: 10mm (bonding) 30mm (joints)
• Minimum depth: 5mm (joints)
• Recommendation: width of joint = 2x depth of joint
• Application Method: Manual- or pneumatic caulking gun
• Application temperature: +5°C until +35°C
• Cleaning: Fix All Cleaner immediately after application and before
• Curing
• Tooling: with soapy solution before skin formation
• Repair with: Fix All High tack

Remarks:

• Fix All High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before application. The drying time of alkyd resin based paints may increase.
• Due to the wide variety of possible substrates, Soudal recommends a preliminary compatibility test.
• While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended.
• This product can not be used as a glazing sealant.