REINIGINGSSCHUIM 500ML PUR CLEANER TEC7

Product description

GUN CLEANER / REMOVAL OF UNCURED FOAM

• Easy to use
• For any gun with standard thread
• Suitable for SprayTec and all PU foams
• Easy to use
• Suitable for all PU foams

Instructions

• 1. Cleaning the Spray & PUR gun: fully close the dose button on the gun and screw Spray & PUR
• Cleaner firmly on the spray gun. Screw
• The dosing knob
• Off and fully depress the lever of the gun. Release the lever when Spray & Pur Cleaner comes out of the gun and allow the cleaner to take effect for at least 2 minutes
• Operate the gun for a few seconds, until clean Spray & PUR Cleaner comes out. Fully close the dosage knob again and unscrew the Spray & Pur Cleaner. Clean the ring thoroughly and remove the remaining product from the gun. Remove the remaining foam from the head of the PUR canister
• 2. Removing uncured PUR foam. Fit the nozzle provided. Test the resistance of the surface in a low or non-visible area. Apply Spray & Pur Cleaner to a cloth and clean the surface with it. Repeat if necessary