LASDEKEN 100X90 OLYMPUS CEPRO

Product description

For the Olympus heat resistant fabric high quality silica fibres are used, which are environmentally non-hazardous. Olympus is treated with a mineral based finish to improve its abrasive resistance and the resistance to fraying. Olympus is free of asbestos! The maximum application temperature is 1000 °C, shortly up to 1300°C. Olympus is recommended for horizontal use, for example as a welding and grinding curtain in situations in which very high temperatures are reached. Olympus silicate-fabrics have excellent characteristics in relation to handling and resistance to high temperature loads. Therefore this fabric is suitable for use as welding blanket even under extreme conditions.

Technical Information

• CEPRO recommends the use of multiple layers for maximum protection.
• Always use welding blankets at an angle of at least 15 degrees.
• The temperatures shown are only an indication.
• The suitability of the selected product should always be tested beforehand.
• Regularly check welding blankets for tears and or other damage.
• Replace damaged blankets where necessary.
• Welding blankets can be used for many purposes and therefore, no guarantee can be given on their use.
• The end user is responsible for determining whether the welding blanket is suitable for use in a specific situation and whether it offers sufficient protection during the work to be performed.
• CEPRO welding blankets are sewn on the cut edges with best quality Kevlar thread.

Custom-made Welding Blankets

The specifications for custom-made welding blankets are:

• Sewn on the cut edges.
• Minimum size available is 1m².
• Maximum size available is 15m².
• The minimum length per side is 100cm.
• Welding blankets are made with 5cm tolerance on the provided measurements
• Custom-made welding blankets are not returnable