KRACHTMONTAGELIJM GRIJS X-TACK - 290ML TEC7

Product description

EXTREME MOUNTING WITHOUT SUPPORT

• Extreme initial tack
• Vibration and impact resistant
• Also on wet surfaces
• Perfect for vertical applications
• Super strong before curing: 600kg/m²
• Stable in adhesive thicknesses up to 40 mm
• Permanently elastic
• Free of phthalates, solvents and isocyanates
• Safe on mirrors, no marking on natural stone
• Almost odourless
• Also on damp, smooth surfaces
• Mould- and bacteria-resistant
• Water- and airtight
• Can be used on most building materials

Instructions

• Application temperature between -10°C and +40°C
• Apply to clean, dust- and grease-free substrates
• Use Tec7 Prepare & Finish for safe cleaning and degreasing, for perfect finishing and for removing uncured Tec7 polymers. In case of heavy soiling, clean with Tec7 Cleaner and/or Multiclean
• Apply with hand or air pistol (best with telescopic piston)
• Due to the wide variety of different plastics and compositions, as well as materials prone to stress corrosion, preliminary tests are recommended
• Test adhesion to plastics, powdered paints, exotic woods and bituminous materials
• Reinforce weak and/or porous substrates first with Poxy Primer
• Due to the variety of lacquers and paints on the market, testing is recommended. The use of alkyd resin-based products may delay the drying process. Alkyd resin paints will cure with delay
• When mirror bonding in sanitary areas, only apply vertical glue strips to avoid stagnant moisture due to condensation
• The nozzle is equipped with a V-groove for perfect dispensing with the appropriate glue height, so DO NOT SMOOTH DOWN
• When applying, position the nozzle vertically on the surface
• Easiest to spray with the Tec7 Multigun
• The strongest bonding with the fastest curing is achieved with adhesive strips (and not with adhesive dots)