KASTVERBINDERS P-10 CLAMEX 300 PR LAMELLO

Product description

• Removable furniture connector, installed in seconds
• For mitre joints from 15 mm and butt joints from 12 mm material thickness
• Aesthetic appearance with the barely visible 6 mm drill hole
• All-rounder for all corner and mitre joints from 22.5° to 180
• Ideal for thin materials, mitres, wooden drawers, open shelves

Clamex P-10 is a demountable furniture connector that is slid into the interlocking workpiece within seconds. Through an access opening, the Clamex P-10 is powerfully connected and released via a lever just like an eccentric joiner. Compared to the Clamex P-14, the Clamex P-10 has a groove depth of only 10 mm and can therefore be used for thinner materials. The furniture joiner is especially ideal for mitre joints and for sharp corners. Like the larger Clamex P-14, the Clamex P-10 also requires an access hole only 6 mm in diameter for operation. Combined with its small size, the furniture connector enables aesthetic furniture designs in thin material thicknesses with almost completely concealed joints and this in many corners. The Clamex P-10 does not require glue, saving valuable time in the production process. The P-System grooves are manufactured either with the groove milling machine Zeta P2 or with a CNC machine. The connectors are then slid into the grooves within seconds, the workpieces are assembled and powerfully joined using levers. There is no need to wait and an assembled workpiece can immediately be further processed or prepared for shipment.

Applications

• Removable connecting fittings for sheet materials in furniture construction
• Glueing aid for mitred joints or corners that are difficult to tension
• Concealed mitred joints in plywood from 15 mm or chipboard from 16 mm
• Joining of wooden drawers from 12 mm thick
• In kitchen construction in tall cabinets, frame constructions or open shelves
• In furniture construction for high-quality furniture with mitred joints or unusual angles, wine racks or bookcases.
• Dummy joints from a material thickness of 12 mm
• Mitre joints from a material thickness of 15 mm

Features

• Dismountable: Always detachable with the rotating lever
• Aesthetic: the small, barely visible opening (Ø = 6 mm) serves to open and close the connector
• Low milling depth: Minimum milling depth with maximum tensile strength
• Stackable: Workpieces with pre-assembled fittings remain stackable, making them easy to store or transport
• Versatile: the small depth of the connector allows mitre cuts of 22.5 to 180°, such as for surface, corner and partition wall joints