HOUTBOUWSCHROEF TX40 TK DD 8,0X140/70MM AR-BRONS

Product description:

• DYNAPLUS WOOD CONSTRUCTION SCREW AR-BRONZE TK + CUTTING POINT TX-40 8.0X140/70

Characteristics:

• The bronze-coloured Dynaplus wood construction screws with Anti-Rust coating are made of hardened carbon steel and specially developed for joining wooden beams in the direct outdoor atmosphere.
• Think, for example, of verandas, (terrace) canopies and other load-bearing timber structures.
• Thanks to the large TX drive, you have optimum power transfer from the (impact) screwdriver to the screw and can easily handle these screws.
• The wood construction screw is a perfect alternative to the 'old-fashioned' wood threaded bolt.
• Timber construction screws are many times stronger and have a much higher pull-out value.
• Thanks to the large load-bearing surface and clamping range resulting from the large Counter head (Ø 14 mm for 6.0 mm screws / Ø 21 mm for 8.0 mm screws), the screws are heavier to load, meaning that fewer fastening points are needed in a timber construction.
• From 18 mm, these long screws are equipped with a split thread that enhances the pull effect at wood-to-wood joints.
• The 'wokkel' pre-drills the screw hole slightly wider, improving the attraction of the second piece of wood and minimising the risk of splitting.
• The screws are made of hardened carbon steel and are super strong.
• For making safe building structures.
• The coated screws are highly corrosion-resistant and have the very highest corrosivity class; C4.
• The AR-coating is composed of three thin layers of organic coating on top of the electrolytic zinc layer which ensures very good adhesion.
• The excellent chemical and acid resistance makes these screws suitable for use in wood species with high tannic acid content, such as Red Cedar, Douglas fir and oak.
• Thanks to the large clamping range of the Counter head, you can also use these screws for mounting soft board materials such as insulation material or wood wool cement boards.