GEREEDSCHAPSWAGEN GEVULD 5L R21562005 (119ST)GEDOR

Product description

• Sheet steel, corrosion-resistant and scratch-resistant powder-coated
• Worktop made of ABS with 3 compartments for small parts
• Manoeuvrable and easy to steer thanks to handlebar grip
• Centrally lockable
• Ball-bearing guide rails
• All drawers can be pulled out on both sides
• Capacity per drawer 20 kg
• Additional storage compartment for larger parts under the last drawer
• GEDORE trapezoidal axle construction ensures smooth running, manoeuvrability and track stability even at maximum load
• As basic workshop equipment, basic range for beginners from all professions or the experienced hobbyist
• Tools in metric sizes
• Clearly arranged in GEDORE red foam modules
• With Check-Tool system checking completeness through 2-coloured foam modules

scope of delivery

• 1/4" 2C-Reversible lever ratchet fine-toothed, 72 teeth | 150 mm
• 1/4" Handle 165 mm
• 1/4" Socket spanner 6-sided 4 4.5 5 5.5 6 7 8 9 10 11 12 13
• 1/4" Socket spanner screwdriver inside 6-side 3 4 5 6 8 10 | 37 mm
• 1/4" socket spanner screwdriver slotted 5.5 6.5 | 37 mm
• 1/4" Socket-head screwdriver cross slot PH 1 2 3 | 37 mm
• 1/4" Socket-head screwdriver cross slot PZ 1 2 | 37 mm
• 1/4" socket spanner screwdriver TX with bore T10 T15 T20 T25 T27 T30 T40 | 37 mm
• 1/4" Extension piece 100 mm
• 1/4" Sliding handle with sliding piece | 115 mm
• 1/4" Cardan joint | 32 mm
• 1/2" 2C Reversible lever ratchet fine-toothed, 72 teeth | 250 mm
• 1/2" Extension 125 250 mm
• 1/2" Push handle with sliding piece 250 mm
• 1/2" Cardan joint | 66 mm
• 1/2" Hexagon socket spanner 10 11 12 13 14 15 16 17 18 19 21 22 23 24 26 27 28 30 32
• 1/2" socket spanner internal hexagonal screwdriver 6 7 8 9 10 12 14 | 55 mm
• Screwdriver slotted 4 5.5 6.5 8 mm
• Screwdriver cross slot PH 1 2
• Screwdriver T10 T15 T20 T25 T30 T40
• Combination spanner 6 7 8 9 10 11 12 13 14 15 16 17 18 19 21 22 24 mm
• Stud spanner 1.5 2 2.5 3 4 5 6 8 10 mm
• Engineer's hammer 300 g
• Flat chisel 125 mm 150 mm
• Cross chisel 125 mm
• Centre punch 4 mm | 120 mm
• Pendulum chisel 4 mm | 120 mm
• Impact driver 3 mm | 150 mm
• Water pump pliers 10" | 250 mm
• Combination pliers 180 mm
• Telephoto Pliers, straight 160 mm
• Diagonal Cutter 160 mm
• Break-off knife with 5 spare blades
• Tape measure 3 m