DRAADSTANG 5.8 M8X175 FIS A FISCHER

Product description

The FIS A versatile rod anchor

The fischer threaded rod FIS A is made from zinc-plated, steel grade 5. 8. The threaded rod is a system component for the various fischer injection mortars. Together with the injection mortars, the fischer threaded rods are suitable and approved for all subsurfaces. A thorough cleaning of the drill hole is recommended for the maximum load-bearing capacity of the system. The system, made from zinc-plated threaded rods in conjunction with fischer injection mortars, is suitable and approved for fixings in dry interiors.

• The universal solution for various fischer injection mortars. For a manageable range and simpler storage
• Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various fischer injection mortars
• Optimum load adaptation due to variable anchorage depths. This lowers installation and material costs
• The anchor rod FIS A can be used with almost every fischer injection mortar (except Highbond special mortar FIS HB). It can be individually selected based on requirements, thus allowing for a wide range of applications
• The wide range of approved anchor rods FIS A from M6 to M30 allows for various applications
• Please refer to the approvals of the injection mortar used

Suitable for

• The anchor rod FIS A is suitable for pre-positioned and push-through installation
• FIS A is set manually into the drill hole, by lightly rotating it until it reaches the drill hole base

Building materials

• In connection with several fischer injection mortars the anchor rod FIS A is approved or suitable for different building materials

Application

• Anchorings with each of the fischer injection mortars such as FIS V Plus, FIS V Zero, FIS PM, FIS SB, FIS EM Plus, FIS EB II, FIS V, FIS VL, FIS P Plus, FIS P, FIS EP and FIS Green