CONTACTLIJM VERSPUITB. 1129 FAST FORWARD 500ML REC

Product description

Fast sprayable contact adhesive for soft insulation materials, plastic and construction films and polystyrene (EPS / XPS). Ideal for quick bonding of large surfaces and difficult materials. Spray adhesive - press on - done. Also available in a starter pack.Contents Start 2 Spray starter pack: 1x 1129 Fast Forward Canister, 1x Material Hose, 1x Ergogrip Pistol, 1x Cleaning Adaptor, 1x Dissol Spray, 1x Nozzle 65° (M) (15-25cm), 1x Nozzle 115° (XL) (25-80cm).Contents Click & Fix starter pack: 2 x 1129 Fast Forward Click & Fix (750ml), 1 x Dissol Cleaner Spray Click & Fix (500ml), 1 x cleaning brush, 1 x spanner, 1 x spray gun (Spray Gun Click & Fix), 1x Nozzle 115° (XL).

Application

• Permanent or temporary bonding of all fibrous, soft and semi-rigid insulation materials, mineral wool (rock wool, glass wool, etc.), nail flange blankets and technical insulation (hvac)
• Bonding of PE film for asbestos removal
• Ideal for plastic and construction films, vapour barriers, geotextiles and felts
• Perfectly suited for bonding sound insulation in case of de-duplicated common walls
• Bonding of polystyrene EPS and XPS
• Bonding of EPDM & DPC (not on flat roofs)
• Flush bonding of pir/pur panels to each other
• Suitable for bonding acoustic insulation materials
• Bonding of textiles, cork, metal, concrete, masonry, limestone, silicate brick, plaster, etc.
• The adhesive is used during all construction phases, from foundation to roof

Features

• Adheres immediately - No waiting times
• PSA (Pressure Sensitive Adhesive)
• Very high initial tack
• Long open time
• Consumption 500ml: up to 8 m² adhesive surface
• Consumption 750ml: up to 6-10 m² adhesive surface
• Consumption 22.1ml: up to 200 m² of adhesive surface
• Good final strength
• Pressure force determines final strength
• Single- or double-sided application
• Repositionable with single-sided use depending on the material to be bonded
• Higher adhesive strength when used on both sides
• Applicable on all substrates
• No filling, does not swell
• Residues can be plastered over
• Easy and fast to apply
• No electricity or compressed air required