CHEMISCH ANKER 2COMP. 280ML SOUDAFIX VE400-SF SOUD

Product description:

• SOUDAFIX VE400-SF is a two-component anchoring resin for the pressure-free securing of threaded rods (ETA: M8-M30), studs, reinforcement bars (ETA: Ø8-Ø32), threaded collars, profiles etc in various solid and hollow materials, such as cracked and uncracked concrete, solid brick, hollow brick, porous concrete, natural stone, plasterboard walls, etc

Characteristics:

• Easy to use and to apply
• Fast cure
• Wide application area, even in wet drill holes, under water and at temp. as low as -10°C
• Styrene free (low odour)
• Cartridge re-usable by simply exchanging static mixer
• Watertight and impermeable fixing
• High chemical resistance
• Fire Resistance class F120 (M8-M30)
• European Technical Approval Option 1 for application in cracked and uncracked concrete
• Emission in indoor air class A+

Applications:

• Securing of heavy loads in solid and hollow building materials. Pressure free anchoring even close to edges. Can be used as repair mortar.

Directions for use:

• Drill hole at recommended depth
• Clean drillhole with brush and air pump thouroughly
• Screw static mixer onto cartridge
• Dispense the first 10 cm of the product to waste (on piece of
• Cardboard) until an even colour (dark grey) is achieved, and the
• Product is well mixed
• Solid stone: fill the drill hole from bottom up.
• Hollow brick: insert sleeve and fill it bottom up, so that the resin
• Is pressed through the tiny holes of the sleeve
• Insert anchoring rod with twisting left-right motion
• Inspect the drill hole for adequate filling
• Observe hardening time. Don't move the anchoring rod during curing
• Leave the excess of product to cure as well.
• Remove it mechanically with hammer and chisel once cured
• Install component, applying the right torque

Remarks:

• There is a risk of staining on porous substrates such as natural stone. On such substrates a preliminary compatibility test is recommended.